Special Features
• Supports Dual/Single Socket 940 for AMD® Opteron Processors
• Dual Channel Serial ATA/RAID (0, 1)
• Dual Channel ATA 33/66/100/133
• 10/100/1000 Gigabit LAN
• System Management Software
• Support DDR 400 Registered ECC Memory

Specifications

CPU
• Supports Single CPU (Socket 940) for AMD® Athlon-64 FX 51 series or Opteron 100 series (1-way) or Opteron 200 series (2-ways) CPU.
• Supports Dual CPUs (Socket 940) for AMD® Opteron™ 200 series (2-ways) processors and up (SledgeHammer DP)
Chipset
• VIA® K8T800™ Chipset
- 800MHz HyperTransport FSB
- Support for AGP 2X/4X/8X/Pro
- Ultra V-Link 1.06GB/s high bandwidth North/South Bridge interconnect
• VIA® VT8237™ Chipset
- A 33MHz/32bit PCI 2.2 compliant bus interface supports up to 6 external devices.
- Dual Channel Serial ATA/RAID (0, 1)
- Dual Channel ATA 33/66/100/133
- USB 2.0, 6 ports, UHCI compliant
- Advanced power management capabilities
- including ACPI/OnNow
- LPC bus to connect peripherals such as super I/O and BIOS.
- IO APIC controller.
Main Memory
• 144-bit DDR at 200, 266, 333MHz, 400MHz.
• Supports DIMM sizes from 64MB (128Mb x 16 DRAMs) to 2GB on each DIMM slot.
• Supports 4 DDR DIMMs upto 8GB (Registered Memory only)
• Supports interleaving memory within DIMMs.
• ChipKill ECC allows continuous correction of 4-bit errors in a failed x 4 memory device.
• For Single AMD® Athlon-64 FX 51 series, it will support Registered Memory up to DDR 400
• For Single or Dual AMD® Opteron Series, it will support Registered Memory up to DDR 333
Slots
• 1 AGP Pro slot
• 4 PCI 32-bit/33MHz slots
Network
• Broadcom BCM5705 Gigabit LAN controllers
- Provides 1000, 100 and 10MB/s data rates
Power Management Features
• Wake up on LAN (WOL), USB, PCI, Mouse
• RTC alarm
• Supports ACPI S1, S2, S4 and S5 functions
System Management
• SMBus (I2C)
• Temperature, voltage, and fan monitors
• Chassis intrusion
BIOS
• 4Mb Flash EEPROM
• PCI 2.2 compliant, VPD, and DMI
• PnP 1.0A, SMBIOS 2.3, ACPI 1.0A, 2.0
• Supports PXE boot protocol
• APM 1.2, WOL
• PC2001 system design compliant
Onboard Connectors
- Power connectors (24+8 SSI)
- Front panel connector
- Four 3-pin cooling fan locking header(2 for system & 2 for CPUs)
- 3-pin Clear CMOS header with a jumper
- Stacked Mouse and keyboard ports
- USB header (Front), Stacked 2 USB (Rear)
- RJ-45 with LEDs
- Stacked 2 serial and 1 parallel ports
Onboard I/O
- 1 PS/2 keyboard port
- 1 PS/2 mouse port
- 1 floppy port
- 2 IDE ports
- 2 serial ports
- 1 parallel port
- 4 USB ports (two on front and two on rear).
- 2 SATA ports
Dimensions
ATX Form Factor: 25.4 x 30.5cm
Mounting
9 mounting holes (ATX Form Factor)
PC Health Monitoring
• Two onboard voltage monitors for CPU core/s, 2.5V, 3.3V, -12V, +12V, 5V, 5VSB,VBAT status monitor
• CPU/Chassis temperature monitoring
• LED and control for chassis intrusion detection
• Support for system management software