Special Features
• Fuzzy Logic 4™
• Live BIOS™ / Live Driver™
• Ethernet 10/100 LAN
• Live Monitor™
• D-Bracket™2
• S-Bracket™

Specifications

CPU
• Supports Intel® Socket 478 for Pentium® 4 (Northwood) Processors
• Support up to 3.2GHz/FSB 800
• Supports FSB 400/533/800 MHz
Chipset
• SiS® 648FX Chipset
- Supports Intel® Pentium® 4 processors with data transfer rate up to 800MHz.
- Supports 64-bit high performance DDR400/DDR333/DDR266 memory controller.
- Supports AGP 8X/4X interface at 0.8v or 4x at 1.5v with fast write transaction.
- Supports bi-directional 16-bit data bus with 1GHz bandwidth MuTIOL.

• SiS® 963L Chipset
- Supports high throughput SiS MuTIOL 1GHz interconnecting to SiS® 963L media I/O.
- Dual-IDE ATA 66/100/133.
- ACPI & PC2001 compliant enhanced power management.
- Low pin count interface for SIO.
- Integrated audio controller with AC97 interface.
- Integrated high speed USB 2.0 controller, 480Mb/s.
Main Memory
• Supports three memory banks using three 184-pin DDR DIMM.
• Supports up to 3GB memory size without ECC.
• Supports 3 unbuffered DIMM DDR266/333 or 2 unbuffered DIMM DDR400.
Slots
• One AGP (Accelerated Graphics Port) slot.
- AGP specification compliant.
- Supports AGP 2.0 4x/8x.
• Six 32-bit PCI bus slots.
BIOS
• The mainboard BIOS provides "Plug & Play" BIOS which
detects the peripheral devices and expansion cards of the
board automatically.
• The mainboard provides a Desktop Management Interface
(DMI) function which records your mainboard specifications.
Onboard IDE
• An IDE controller on the SiS® 963L chipset provides IDE HDD/CD-ROM with PIO, Bus Master and Ultra DMA66/100/133 operation modes.
• Can connect up to four IDE devices.
Audio
• AC97 link controller integrated in SiS® 963L.
• 6 channels software audio codec RealTek ALC655.
- Compliance with AC'97 v2.3 Spec.
- Meet PC2001 audio performance requirement.
- Can support SPDIF Out via S-Bracket only.
Networking
• SiS® 963L integrated MAC + RealTek 8201BL PHY.
- Supports 10Mbps and 100Mbps auto-negotiation operation.
- Supports ACPI power management.
Onboard Peripherals
On-Board Peripherals include:
- 1 floppy port supports 2 FDDs with 360K, 720K, 1.2M, 1.44M
and 2.88Mbytes.
- 2 serial ports (COM A + COM B).
- 1 parallel port supports SPP/EPP/ECP mode.
- 6 USB ports (Rear x 4/ Front x 2).
- 1 IrDA connector for SIR.
- 1 RJ-45 LAN jack.
- 1 audio port.
- 1 S-Bracket pin header.
- 1 D-Bracket 2 pin header.
Dimensions
30.5 cm(L) x 22.0 cm(W) ATX Form Factor
Mounting
6 mounting holes.