Processor
Supports single socket 478, 400 MHz FSB Intel® Pentium® 4 processor from 1.70 GHz to 2.60 GHz and higher
Supports single 400 MHz FSB Intel® Celeron™ processor from 1.70 GHz to 1.80 GHz and higher

Chipset
Intel® 845GL chipset
• 82845GL Graphics and Memory Controller Hub (GMCH)
• 82801DB I/O Controller Hub 4 (ICH4)
Winbond® Smart@I/O® W83637HF

Bus Frequency
400 MHz system bus

System Memory
2 x DIMM slots
Supports up to 2GB DDR266/200 SDRAM
Supports Unbuffered DDR SDRAM modules

IDE
Dual channel ATA 100/66/33 IDE
Supports ATAPI IDE CD-ROM, ZIP-100 and LS-120
Supports maximum of four (4) ATAPI / IDE devices

Audio
Realtek® ALC650
AC'97 Audio CODEC
6-channel audio and S/PDIF (optional via IWILL SuperAudio™ card)
1 x 4-pin CD-ROM audio-in header
1 x 4-pin AUX header


Integrated Graphics
Intel® Extreme Graphics
Integrated in Intel® 845GE, 845GV, 845G and 845GL chipsets

LAN Controller(s)
Realtek® RTL8100B 10/100M Fast Ethernet Controller
10/100 Mbps operations

Expansion Slots
1 x AGP slot, ONLY supports DVI/TV-out add-on card
3 x 32-bit/33 MHz PCI slots

I/O Interface
2 x ATA/100 IDE connectors
1 x Floppy connector
1 x VGA port
1 x RJ-45 port
2 x PS/2 connectors (keyboard and mouse)
1 x 9-pin 16550-based serial port
1 x 25-pin ECP/EPP parallel port
3 x USB 2.0 ports
1 x Internal USB 2.0 port
1 x Internal Wake-on-LAN header
1 x Compact Flash reader connector
1 x Memory Stick / Secure Digital reader connector
1 x Internal USB 2.0 pin header
3 x Audio connectors (Line-in | Line-out | MIC) mP4G, mP4GL

BIOS
Award BIOS
4Mb Flash ROM
Flash Write Protection for BIOS
Write Protection for memory SPD EEPROM
Support ACPI S1 and S3
BIOS feature set
BIOS setup features
Auto configuration for IDE hard disk type
Multiple boot options

Hardware Monitoring
Winbond® hardware monitor
Analog Device fan controller for monitoring and alerting
• 1 x 3-pin processor fan header
• 1 x 3-pin chassis fan header
Processor temperature sensor
Voltage monitoring
• Vcore | +1.5V | +2.5V | +3.3V | +5V | +12V | Battery | 5VTSB
Chassis intrusion detection header

Board Size
Micro-ATX
9.65 in x 8.7 in (245mm × 220mm)
4 layer PCB

Package Contents
1 x IWILL mP4GL motherboard
1 x Users' manual
1 x IWILL Power Installer CD
1 x ATA/100 IDE cable
1 x Floppy cable
1 x I/O shield