veloCD 16/10/40 Specifications
Product Name veloCD
Model Number AI-161040
Minimum System Requirements:
Processor Intel Pentium 233 MHz processor or equivalent
Operating System(s) Microsoft Windows 98SE/ME/2000 or NT 4.0
Memory 64 MB RAM
Hard Disk 160 MB hard disk space for software installation
Hard Disk 700 MB hard disk space for temporary CD-image files (optional)
For Hardware Installation available standard half-height drive bay
Performance Specifications:
Write Speed 16X
Rewrite Speed 10X
Read Speed 40X
Rip Speed 32X
Burst Read 16.6 MB/sec.
Data Buffer 2 MB with BURN-ProofÙ
Spindle Motor Brushless
Error Rate Mode 1: 1 Block/1012 Bits
Mode 2: 1 Block/109 Bits
Disc Specifications:
Compatible Disc Sizes (without adapter) 12 CM, 8 CM, business card and most custom-shape discs.
Readable Formats CD-DA, CD-ROM (Mode 1), CD-ROM XA (Mode 2: form 1 or form 2), CD-ROM (Mixed Mode), Photo CD, VideoCD, CD-I (MPEG movies), CD-Extra, CD Text
Writeable Formats ISO 9660-HFS, Rockridge, Photo CD, VideoCD, CD-I, CD-Extra (CD-Plus), Enhanced CD, CD-Text, CD-Midi
Writing Modes Track-at-Once, Disc-at-Once, Session-at-Once, Multisession, Fixed and Variable Packet Writing
Front Panel:
Buttons Tray open/close, manual emergency eject pin hole
Lights Disc in/Activity/Write
Disc Loading Auto
Headphone Jack 1/8-inch stereo mini-plug
Volume Control Thumbwheel
CD Audio Controls Stop/Eject
Rear Panel:
Power Supply DC +5V at average 600mA (peak 1.1 A) DC +12V at average 500 mA (peak 1.5 A)
Data Interface Connector IDE bus, 40-pin flat ribbon type. Interface complies with ANSI X3T13/1153D (ATA/ATAPI-4). Supports 59 commands, including special comands for CD-R.
Audio Output(s) Stereo analog output, Molex connector (L*G*G*R), MPC3 standard
Jumper Switches Master, slave, cable select
Dimensions and Weight:
Dimensions 5.78" x 1.64" x 7.95" (146mm x 41.3mm x 202mm), excluding front panel
Weight 2.5 lbs (1.2 kg)
Reliability:
MTBF 60,000-80,000 POH (13% duty cycle)
Tray Loading 100,000 - 200,000 Load Cycles