Form factor ATX 12V
Watts 300W
Remote ON/OFF Control (The power supply shall accept a logic collector level which will disable / enable all output voltage; excluding +5V standby. )
Temperature range Operating 0~50
Storage -20~+65
Temperature coefficient 0.01%/
Hold-up time At 115V/ 60 Hz 16.0 ms minimum
Dielectric withstand Input / output 1800VAC for 1 second
Input to frame ground 1800VAC for 1 second
Humidity 5~95% RH
Efficiency Min 65%
Typical 70% (at full load)
Power good signal Turn-on delay from 100ms to 500ms
Overload current protection 150% Max
Over voltage protection (+5V output: 6V}0.5V )
Input Characteristics Inrush current 80 amps cold, 100amps warm measured at 132Vrms
Fan Noise Controller Option ...
No user reviews yet, click here to add the first review! 
N/A
