Form factor ATX 12V
Watts 300W
Remote ON/OFF Control (The Power supply shall accept a logic open collector level which will disable /enable all out put voltage ;excluding +5V standby)
Temperature range Operating 0~50
Storage -20~+65
Temperature coefficient 0.01%/
Transient response (output voltage recovers in less than 1 ms max. Following a 25%load change )
Dielectric withstand Input / output 1800VAC for 1 second
Input to frame ground 1800VAC for 1 second
Humidity 5~95% RH
Efficiency Min 65%
Typical 70% (at full load)
Power good signal Turn-on delay from 100ms to 500ms
Overload current protection 150% Max
Over voltage protection (+5V output: 6.5V;+3.3V output: 4.6V;+12V output: 15.5 V)
Input Characteristics Inrush current 60 amps cold, 80amps warm measured at 264Vrms ...
No user reviews yet, click here to add the first review! 
N/A
