Form factor ATX 12V
Watts 300W
Remote ON/OFF Control (The power supply shall accept a logic collector level which will disable / enable all output voltage;excluding +5V standby)
Temperature range Operating 0~50
Storage -20~+80
Temperature coefficient 0.01%/
Transient response (output voltage recovers in less than 1 ms max. following a 25% load change)
Hold-up time At 115V/ 60 Hz (17ms minimum at full load & nominal input voltage)
Dielectric withstand Input / output 1800VAC for 1 second
Input to frame ground 1800VAC for 1 second
Humidity 5~95% RH
Efficiency Min 65% (at full load)
Power good signal Turn-on delay from 100ms to 500ms
Overload current protection 150% Max
Over voltage protection (+5V output : 6.82V max.+3.3V output: 4.5V max)
Input Characteristics Inrush current 60A cold 90A ware at 132 VAC
Fan Noise Controller Option ...
No user reviews yet, click here to add the first review! 
N/A
