Form factor ATX 12V
Watts 400W
Remote ON/OFF Control (The power supply shall accept a logic collector level which will disable / enable all output voltage ;excluding +5V standby)
Temperature range Operating 0~50
Storage -20~+80
Temperature coefficient 0.01%/
Transient response (output voltage recovers in less than 1 ms max. following a 25% load change )
Hold-up time At 115V/ 60 Hz (16 ms minimum at full load & nominal input voltage )
Dielectric withstand Input / output 1800VAC for 1 second
Input to frame ground 1800VAC for 1 second
Humidity 5~95% RH
Efficiency Min 65%
Typical 70% (at full load)
Power good signal Turn-on delay from 100ms to 500ms
Overload current protection 150% Max
Over voltage protection (+5V output : 6.5V; +3.3V output: 4.6V;+12V output: 15.5V ) ...
No user reviews yet, click here to add the first review! 
N/A
