Form factor ATX 12V
Watts 400W
Remote ON/OFF Control (The Power supply shall accept a logic open collector level which will disable /enable all out put voltage ;excluding +5V standby)
Temperature range Operating 0~50
Storage -20~+65
Temperature coefficient 0.01%/
Transient response (output voltage recovers in less than 1 ms max. following a 25%load change)
Hold-up time At 230V/ 50 Hz 16.0 ms minimum
Dielectric withstand Input / output 1800VAC for 1 second
Input to frame ground 1800VAC for 1 second
Humidity 5~90% RH
Efficiency Min 68%
Typical 70% (at full load)
Power good signal Turn-on delay from 100ms to 500ms ...
No user reviews yet, click here to add the first review! 
N/A
