Feature
Intel Pentium® 4 Processor (Northwood)
Socket 478 with FSB 400/533/800 MHz
3 DDR 333/266/400 Memory Sockets
6 Channel AC97 Audio
3Com 10/100 Ethernet LAN
2 ATA133 Channels, up to 4 ATA 133 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by optional cable)


Processor
Socket 478 Intel Pentium® 4 Processor (Northwood)


FSB
400/533/800 MHz


Chipset
North Bridge : ALi M1683
South Bridge : ALi M1563
LAN Chip : 3Com 3C920
Audio Codec : Realtek ALC655
I/O Chip: Winbond Smart I/O W83697HF


Memory
3 * DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR SDRAM up to 3GB
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 333/400


Expansion Slots
1 x AGP(3.0) 8X slot ( 1.5V & 0.8V only)
5 x PCI slots (PCI 2.2 compliant)


IDE Connectors
2 ATA133 Channels, up to 4 ATA 133 IDE devices


Onboard I/O Connectors
1 x Floppy Connector
3 x USB 2.0/1.1 header (6 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers ( 1 fan rotation detection function )
1 x 10 pin system panel header (Intel spec)
1 x 3 pin Power LED header
1 x Front audio header (Intel spec)
1 x Case Open detection header


I/O via Back Panel
PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Line-in/Line-out(Speaker Out)/MIC


Power
20-pin ATX power connector, 4-pin ATX 12V power connector


BIOS Feature
2Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer


Hardware Monitoring
2 FAN sensors, CPU/System voltages and temperature monitoring


Special Feature
Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)


Form Factor
ATX (293 *200 mm)